Model Number

Mesh4

tainless steel is wear-resisting, heat-resisting, acid-resisting and corrosion-resisting. Just because of these characteristics, the wire mesh made of stainless steel is extensively used as slurry mesh in petroleum industry, sieve and filtration mesh in chemical industry, acid-cleaning mesh in electric plating industry, etc.

Our Stainless Steel Wire Mesh products are generally made of stainless steel Type 304, Type 304L, Type 316 and Type 316L.

Our Welded wire mesh are made of high quality iron wire through automatic process and sophisticated welding technique. The end product is level and flat, sturdy structure, and even strength throughout, the netting shows no signs of wear and tear when cutting off a part or under a stress.
This kind of welded wire mesh is galvanised by hot dipping after welding, having good corrosive resistance and qualities which are not usually found in average wire mesh.
Welded wire mesh is extensively used in industry and agriculture building, transportation and mining for all such purposes as poultry houses, egg baskets, runway enclosures, draining rack, fruit drying screen, fence.

Hexagonal Mesh,Chicken Mesh,
Material:steel wire,PVC coated Iron Wire,Stainless Steel Wire

Hexagonal wire netting is also known by the name of chicken mesh. Hex. wire netting is manufactured in galvanised iron (GI) and galvanised iron drawn (GID) wire in width of 45-180cm. Hexagonal wire netting is mostly used as light fencing for poultry farms, birds cages, tennis couts and light reinforcement in splinter proof glass and cement concrete, plastering and laying of roads. Also used for insulation in cold storage and AC plans.

Square hole woven mesh:
Galvanized square wire mesh is manufactured in galvanized iron wire. We produce square wire mesh from 2 mesh to 60 mesh per linear inch, 60-150cm in width and 15-30.50 meters length. Any special size can be manufactured as per specifications. Square wire mesh is mostly used as mosquito net and industrial sieves in industries like sugar, chemical, stone cursher etc.
We can offer Stainless Steel Square Hole Mesh,Aluminum Alloy Square hole Mesh and Brass Square Hole Mesh.

Mist Eliminators are separation devices, used throughout all kinds of Process Industries, to remove liquid droplets from gas and/or vapour streams. The most commonly used type is the ??wire mesh?? mist eliminator, as it has no moving parts and requires a little (if any) or no maintenance. Our wire mesh demisters are available in a wide range of styles, sizes and shapes. Wire mesh demisters are made slightly oversized and are to be compressed at their rim surface when installed, to fit snugly into the vessel.


In the Process Industry liquid mist, entrained in the product vapour, will undermines the process performance in several ways, such as:
Loss of Valuable Liquids
Loss in Overhead Vapour Quality
Fouling and Corrosion of Downstream Equipment
Catalyst Poisoning
Reduction in Operating Capacities
Unwanted Emissions from Vent Stacks

Often, this requires vapour-liquid separation in e.g. knock-out drums, heat exchangers, overhead accumulators, evaporators, crystallisers, liquid-phase reactor vents, compressor feed surge drums, or others.

BENEFITS, WHEN USING THE DEMISTERS:-

* Higher separation efficiency
* Increasing throughput capacity
* Provides equipment protection
* Reducing the loss of valuable chemicals
* Prevents (air) pollution
* Eliminate contamination
* Improvement of product purity

APPLICATIONS
* Absorption columns
* Distillation columns
* Boilers and Scrubbers
* Oil/water separators
* Desalination units
* Salt- and sugar industry
* Desulphurization plants

Please contact our office for detailed information of our system applications. We will be obliged to serve you.